Solid Brass Wall-to-Wall Closet Rod for Built-In Wardrobes
-
Estimated delivery: Nov 03 - Nov 07
Hurry up, only 10 items left in stock.
Transform an alcove or built-in wardrobe with this handcrafted solid brass wall-to-wall closet rod. Designed to span between two opposing walls, it provides a clean, uninterrupted hanging solution while showcasing the warmth of unlacquered brass. Ideal for custom closets, dressing rooms, laundry spaces, and boutique interiors, it combines architectural simplicity with dependable everyday performance.
Features
Made from solid brass pipe and fittings, so it will not chip, peel or rust like plated steel.
Solid brass carries winter coats and full wardrobes without bending.
Develops a warm, antique patina with time; a quick polish restores the shine.
Handmade for you in 21 sizes, with custom sizes available on request.
Screws between two side walls or cabinet sides with end flanges. Everything you need to mount the rail is listed below.
Works in walk-in closets, open wardrobes, entryways, dressing rooms, laundry rooms and boutiques.
Drawing & dimensions
Size chart
How to choose: Measure the inside width between the two walls at rod height and choose the closest size. Custom lengths are available.
| 24" (61 cm) | 28" (71 cm) | 32" (81 cm) | 33" (84 cm) |
| 36" (91 cm) | 39" (99 cm) | 40" (102 cm) | 44" (112 cm) |
| 48" (122 cm) | 52" (132 cm) | 56" (142 cm) | 65" (165 cm) |
| 72" (183 cm) | 87" (221 cm) | 90" (229 cm) | 92" (233 cm) |
| 96" (244 cm) | 100" (254 cm) | 110" (279 cm) | 120" (305 cm) |
| 130" (330 cm) |
Need a different size? We make custom sizes, just contact us with your measurements.
Closet rod height guide
| Single hang (shirts, jackets, dresses) | 66" (168 cm) from the floor |
| Double hang, top rod | 80"โ82" (203โ208 cm) |
| Double hang, bottom rod | 40"โ42" (102โ107 cm) |
| Long hang (coats, long dresses) | 70"โ72" (178โ183 cm) |
| Rail to back wall | at least 11"โ12" (28โ30 cm) so hangers swing freely |
Installation guide
Tools: drill, level, tape measure, pencil, stud finder, screwdriver.
- Mark the height. Mark both side walls level at your rod height (66" for single hang, 40" and 80" for double hang).
- Fix one flange. Screw the first end flange into the stud, cabinet side or a strong anchor.
- Fit the rod. Slide the rod into the fixed flange, place the second flange on the other end and check it is level.
- Fix the second flange. Screw the second flange to the opposite wall and tighten any set screws.
Specifications
| Material | Solid brass pipe and fittings |
| Type | Wall-to-wall closet rod |
| Mounting | Screws between two side walls or cabinet sides with end flanges |
| Sizes | 21 sizes, see the size chart |
| Included | Brass rod, 2 end flanges |
| Finish | Unlacquered brass (develops a natural patina) |
| Shipping | Free express shipping |
| Returns | 30-day free returns |
FAQ
What size wall-to-wall closet rod do I need?
Measure the inside width between the two walls at rod height and choose the closest size. Custom lengths are available.
How high should a clothes rail be?
For single hanging, mount the rail at about 66" from the floor. For double hanging use about 80" and 40". For coats and long dresses, about 70"โ72".
How much hanging space do I need?
Allow roughly 1" of rail per shirt or blouse and about 2" per coat or jacket.
Is it solid brass?
Yes. It is made from solid brass pipe and fittings, not plated steel, so the finish cannot chip off.
Will unlacquered brass tarnish?
It develops a warm natural patina over time. Wipe with a dry cloth; use a brass polish whenever you want the original shine.
Can I get a custom size?
Yes. Every piece is made to order; contact us with your measurements.
What is your return policy?
You have 30 days for free returns, and shipping is free with express delivery.
Complete the look: Brass wall hooks ยท Brass gallery rails ยท All brass clothes rails
Couldn't load pickup availability
Shop now and bring authentic artisan craftsmanship into your space.
Specifications
Specifications
FAQ
FAQ
Materials & Care
Materials & Care
Authentic Solid Brass and Copper
Every Kinycraft piece is handcrafted from genuine copper or premium solid brass. We do not use lightweight plated metals or imitation finishes. Our materials are carefully selected for their strength, durability, natural beauty, and ability to develop character over time.
Because our products are handmade, slight variations in texture, hammering, color, and finish are natural. These differences are not defectsโthey make every piece unique.
Unlacquered Brass
Our unlacquered brass products are made from solid brass without a protective lacquer coating. They normally arrive with a bright, polished appearance and gradually develop a natural patina through exposure to air, moisture, oils, and everyday use.
The finish may become warmer, darker, or more aged over time. This natural transformation is known as a living finish and is part of the authentic character of unlacquered brass.
Customers who prefer the original shiny appearance can regularly polish the brass. Those who appreciate an aged, vintage look can allow the patina to develop naturally.
Copper
Our copper pieces are made from genuine copper and may be offered in polished, hammered, aged, oxidized, or custom patina finishes.
Like unlacquered brass, copper is a living material. Its color may naturally deepen or change over time depending on humidity, handling, water exposure, and the surrounding environment. These variations add warmth and individuality to each handcrafted product.
Daily Cleaning
For regular care:
- Clean the surface with a soft cloth, warm water, and mild soap.
- Rinse away any soap residue with clean water.
- Dry the item immediately with a soft, lint-free cloth.
- Wipe away water spots regularly, especially in hard-water areas.
- Use a soft microfiber cloth to avoid scratching the finish.
Maintaining a Shiny Finish
To preserve or restore a bright polished appearance:
- Use a brass or copper polish suitable for unlacquered metal.
- Apply a small amount using a soft cloth.
- Always test the product on a small, discreet area first.
- Polish gently and follow the product manufacturerโs instructions.
- Remove all remaining polish and buff the surface with a clean cloth.
Frequent polishing is optional. It should only be done when you wish to reduce or remove the natural patina.
Preserving the Natural Patina
To maintain the naturally aged appearance:
- Avoid metal polish and abrasive cleaning products.
- Clean gently using mild soap and water.
- Dry the surface after cleaning.
- Allow the finish to continue changing naturally.
- Avoid excessive rubbing, as this may create brighter areas.
Products to Avoid
Do not use:
- Bleach or chlorine-based cleaners
- Strong chemical cleaning sprays
- Abrasive powders or scouring pads
- Steel wool or hard brushes
- Oven cleaners or aggressive degreasers
- Highly acidic products unless specifically intended for brass or copper
Harsh products may stain, scratch, discolor, or permanently alter the metal finish.
Important Care Notes
Water quality, humidity, fingerprints, cleaning habits, and environmental conditions can affect how quickly brass and copper develop patina. Areas that are frequently touched may change color faster than less-used sections.
For faucets, sinks, showers, and bathroom accessories, drying the surface after use will help reduce mineral deposits and water marks. A soft cloth should be used around engraved, hammered, or detailed areas.
Natural patina, surface variation, and gradual color changes are expected characteristics of genuine unlacquered brass and copper. They are not considered manufacturing defects.
For additional care instructions, finish recommendations, or help selecting the right material for your project, please contact us.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
