Hammered Half Moon Brass Cabinet Pulls – Set of 2
-
Estimated delivery: Nov 10 - Nov 14
Out of stock
Bring warmth and character to cabinetry with these premium handmade solid brass cabinet pulls. Two complementary semicircular pulls create a circular feature when installed beside one another on double cabinet doors.
Designed for kitchen cabinets, bathroom vanities, dressers, sideboards and built-in furniture, this hardware complements natural wood, painted cabinetry, marble and warm neutral interiors.
Material and finish
- Handmade from solid brass.
- Solid Brass or Aged Brass appearance, as pictured.
- Handmade texture and finish variations make each piece individual.
Choose your set
Set of 2 is the primary selection. Also available in sets of 3, 4, 5, 6, 8, 10 and 12. Set quantities count individual half-moon pieces, not complete circles. A set of 2 contains two complementary halves for one double-door arrangement. Odd-numbered sets include an additional individual half. Prices are for the complete selected set, not one piece.
Size and installation
Standard size: Each half: 100 mm high × 50 mm wide (3.94 × 1.97 in); paired face: approximately 100 mm (3.94 in) diameter, excluding the door gap. One design size, supplied in your selected set quantity. These dimensions are the standard made-to-order specification. Handmade contours may vary slightly.
Compatible uses: Designed for paired cabinet doors, wardrobes and sideboards. Install one half on each door, leaving enough clearance at the centre for both doors to open independently. Check panel thickness, grip clearance and nearby trim before fitting. These furniture handles are not specified for heavy appliance doors.
Installation: Position the actual handle on the door or drawer and mark its fixing points before drilling. Use the supplied pieces as the fitting template; face size is not mounting-hole spacing. Fit the matching screws from the inside of the panel where the handle uses rear fixings. Align and hand-tighten without overtightening.
Mounting screws included. Check the supplied screw length against your door or drawer thickness; thicker panels may require a different screw length. Check thread compatibility before using replacement screws.
Care
Wipe gently with a soft cloth and avoid abrasive cleaning products. Ask for finish-specific care guidance before using brass polish.
Frequently asked questions
Is the price for two pieces? The starting price is for a set of 2. Select a larger set to see its total price.
Will every piece look identical? Small variations in texture and tone are characteristic of handmade brass hardware.
Couldn't load pickup availability
Shop now and bring authentic artisan craftsmanship into your space.
Specifications
Specifications
FAQ
FAQ
Materials & Care
Materials & Care
Authentic Solid Brass and Copper
Every Kinycraft piece is handcrafted from genuine copper or premium solid brass. We do not use lightweight plated metals or imitation finishes. Our materials are carefully selected for their strength, durability, natural beauty, and ability to develop character over time.
Because our products are handmade, slight variations in texture, hammering, color, and finish are natural. These differences are not defects—they make every piece unique.
Unlacquered Brass
Our unlacquered brass products are made from solid brass without a protective lacquer coating. They normally arrive with a bright, polished appearance and gradually develop a natural patina through exposure to air, moisture, oils, and everyday use.
The finish may become warmer, darker, or more aged over time. This natural transformation is known as a living finish and is part of the authentic character of unlacquered brass.
Customers who prefer the original shiny appearance can regularly polish the brass. Those who appreciate an aged, vintage look can allow the patina to develop naturally.
Copper
Our copper pieces are made from genuine copper and may be offered in polished, hammered, aged, oxidized, or custom patina finishes.
Like unlacquered brass, copper is a living material. Its color may naturally deepen or change over time depending on humidity, handling, water exposure, and the surrounding environment. These variations add warmth and individuality to each handcrafted product.
Daily Cleaning
For regular care:
- Clean the surface with a soft cloth, warm water, and mild soap.
- Rinse away any soap residue with clean water.
- Dry the item immediately with a soft, lint-free cloth.
- Wipe away water spots regularly, especially in hard-water areas.
- Use a soft microfiber cloth to avoid scratching the finish.
Maintaining a Shiny Finish
To preserve or restore a bright polished appearance:
- Use a brass or copper polish suitable for unlacquered metal.
- Apply a small amount using a soft cloth.
- Always test the product on a small, discreet area first.
- Polish gently and follow the product manufacturer’s instructions.
- Remove all remaining polish and buff the surface with a clean cloth.
Frequent polishing is optional. It should only be done when you wish to reduce or remove the natural patina.
Preserving the Natural Patina
To maintain the naturally aged appearance:
- Avoid metal polish and abrasive cleaning products.
- Clean gently using mild soap and water.
- Dry the surface after cleaning.
- Allow the finish to continue changing naturally.
- Avoid excessive rubbing, as this may create brighter areas.
Products to Avoid
Do not use:
- Bleach or chlorine-based cleaners
- Strong chemical cleaning sprays
- Abrasive powders or scouring pads
- Steel wool or hard brushes
- Oven cleaners or aggressive degreasers
- Highly acidic products unless specifically intended for brass or copper
Harsh products may stain, scratch, discolor, or permanently alter the metal finish.
Important Care Notes
Water quality, humidity, fingerprints, cleaning habits, and environmental conditions can affect how quickly brass and copper develop patina. Areas that are frequently touched may change color faster than less-used sections.
For faucets, sinks, showers, and bathroom accessories, drying the surface after use will help reduce mineral deposits and water marks. A soft cloth should be used around engraved, hammered, or detailed areas.
Natural patina, surface variation, and gradual color changes are expected characteristics of genuine unlacquered brass and copper. They are not considered manufacturing defects.
For additional care instructions, finish recommendations, or help selecting the right material for your project, please contact us.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
